Gigalight PSM4 100G Transceivers are available in 2km or 10km versions with the following features:
- Hot-pluggable QSFP28 form factor
- Full-duplex transceiver modules
- 4-channel 1310nm DFB array and PIN photo-detector array
- Internal CDR circuits on both receiver and transmitter channels
- Support CDR bypass
- Data rate up to 25.78125Gbps per channel
- Compliant with 100G Ethernet
- Compliant with InfiniBand 4x EDR
- Power consumption < 3.5W
- Up to 2km or 10km reach for G.652 SMF
- MPO12/APC receptacle
- Operating case temperature range: 0°C to 70°C
- 3.3V power supply voltage
- RoHS compliant (lead free)
PSM4 stands for Parallel Single Mode 4 channel with each channel transmitting at 25Gbps. The connector type is MTP12 so you can easily split the transceiver into 4 separate 25Gbps lanes using an MTP to LC splitter cable.
The Gigalight PSM4 100G Transceivers have the following part numbers
GQM-SPO101-IR4C for 2Km operation and GQM-SPO101-LR4C for 10km operation.
GQM-SPO101-IR4C GQM-SPO101-LR4C