The number one choice for point of load non-isolated supplies for FPGA, high power ASIC and high performance ARM processors. ABB point of loads are now available up to 90A with design guides and reference designs for all Xilinx Kintextm and Virtex UltraScaletm devices. Featuring High Power Density, High Efficiency, and advanced control with PMBus 1.3, point of load power supplies from ABB are a perfect choice for your most demanding designs.
The advanced digital DLynx II* family of non-isolated Point of Load (POL) DC-DC board-mounted power modules brings an expanded set of industry-standard PMBus** commands, increased performance and power handling ranges to the digital POL world. With highly accurate digital telemetry, space-saving Digital Tunable Loop* technology and exceptional current density, the DLynx II family gives designers the tools to quickly take advantage of the latest high performance, high current digital power converters.
The new standards-based DLynx* family of non-isolated Point of Load (POL) DC-DC board-mounted power modules are available in DOSA-based digital and analog versions. An industry-standard PMBus** interface and space-saving Tunable Loop* technology deliver industry-leading current density of 9.0 A/cm2.
The BoostLynx* family of four products (65W and 130W with High Voltage and Low Voltage versions), provides voltage step-up from an input voltage of 8-16Vdc to an output voltage of 16-34Vdc or 32-54Vdc. Boost PoLs are suitable for a wide range of electronic products where some components require higher voltage than the typical 12Vbus. For example, cellular small cell remote radio head (RRH). Boost PoLs can also be used to step up an existing 12V bus to a 24V or 48Vbus.
The DualDLynx* Series are non-isolated Point of Load (POL) DC-DC board-mounted power module products, offering an industry-leading 30 percent reduction in board space over previous and competing solutions. The new power modules include the PMBUS** interface for digital configuration, communication and control, as well as adaptive voltage scaling for power reduction. They also incorporate Tunable Loop* technology deliver leading current density for a broad range of applications including data communications, telecommunications, storage, industrial, medical, and military infrastructure equipment. The modules offer OEMs a high density solution to using two lower amperage parts as well as a significant size advantage to minimize the use of board space during manufacturing.
The ProLynx* family of DC-DC converters accelerates speed to market by reducing design cycle for applications requiring a wide input voltage tolerance. These high efficiency, superior thermal derating modules operate over an ultra-wide input range of 9-36Vin and provide a precisely regulated output voltage ranging from 3.0 – 18Vdc, programmable via an external resistor. Ruggedized (-D) versions are capable of operating in extremely high temperature environments up to 105deg C and withstand higher levels of shock and vibration (MIL STD 810F).
The SlimLynx* power modules are slim non-isolated dc-dc converters in a low profile 2.9mm height. These modules operate over a wide range of input voltage and provide a precisely regulated output voltage from 0.45 to 5.5Vdc, programmable via an external resistor and PMBus control.
The TLynx* family of non-isolated DC-DC modules is the 3rd generation of world class point-of-load (POL) converters. These high efficiency, superior thermal derating modules operate over a wide range of input voltages from 2.4 to 16Vdc and provide a precisely regulated output voltage ranging from 0.59Vdc to 8Vdc, programmable via an external resistor. Modules offer class-leading transient response and current density. The highest current modules (30A & 50A) are also parallelable for increased expandability.
The Naos Raptor* series of power modules are non-isolated SIP (single in-line package) DC-DC converters that can deliver up to 60A of output current. These modules operate over a wide range of input voltage (4.5-14Vdc) and provide a precisely regulated output voltage from 0.59Vdc up to 6.0 Vdc, programmable via an external resistor.
Previous Generation Non-Isolated Power Supplies
Previous generations of highly reliable DC-DC board power modules are available for an array of applications in the telecom, datacom, industrial, medical and military markets.
High Power Barracuda
The High Power Barracuda family offers digital control and full-regulation in a DOSA compliant footprint. These PMBus equipped DC-DC bus converters are designed to support 9.6V to 12Vdc intermediate bus applications where multiple low voltages are subsequently generated using point of load (POL) converters. The converters can also be used in other applications requiring a tightly regulated output voltage.
Low Power Barracuda
The Low Power Barracuda family offers isolated DC-DC converters that are cost competitive and have optimum efficiency. These modules deliver up to 120W at a precisely regulated output voltage over a wide range input voltage from 36-75Vin. These products are used to power communication equipment, distributed power, intermediate bus architectures, the latest integrated circuits and microprocessors.
The Hammerhead Series offer an ultra-wide input voltage range from 18 to 75Vdc with Total Efficiency* architecture technology that reduces power loss up to 50%. These products are designed for extreme temperature conditions of -40deg C to 85deg C and are cost-effective modules for medical, military and other industrial applications.
The Orca series is a family of isolated DC-DC fully regulated, board-mounted power amplifier modules. The series is designed to significantly lower costs and boost energy efficiency for cellular base stations, remote radio heads, distributed antenna systems and WiMAX controllers.
ATCA PIM Modules
The PIM400 series of Power Input Modules are designed to greatly simplify the task of implementing dual redundant, hot swap -48Vdc power distribution with EMI filtering on an ATCA or other telecom boards. The PIM400 with optional I2C digital interface capability, when used with a variety of GE’s series of Bus converters (BarracudaTM Series) /POLs (DLynxTM Series) provides for a quick, simple and elegant power solution to a wide variety of demanding & intelligent power system architectures.
The CLP is a highly dense, open-frame, fan-less power supply for embedded applications requiring high availability from a compact size. With the ability to adapt to either forced air or conductive plate cooling, the CLP power supply offers a great solution for OEMs requiring design flexibility of power supplies used in their applications. The module offers greater than 90% peak efficiency enabling economical and long life performance.
The Slim Line Power (SLP) Series of front-end rectifiers are highly efficient and dense isolated power supply units. The compact 1U x 1U or 1.5U x 1.5U form factor makes these rectifiers ideal for space constraint applications. The mid to light load efficiency of these power supply units are of key importance given the nature of the power consumption of the end application.
The SLP Series rectifiers provide comprehensive solutions for systems connected to commercial AC mains, power plants or telecom central offices. The industry standard PMBus compliant I2C communication bus offers a full range of control and monitoring capabilities while the SMBAlert signal pin alerts customers automatically of any state change within the power supply.
The CAR Series of front-end rectifiers provide highly efficient isolated power from worldwide input mains in a compact 1U industry standard form factor providing an unprecedented power density of 30W/in3. These rectifiers are ideal for applications where mid to light load efficiency is of key importance given the nature of the power consumption of the end application. The CAR Series rectifiers provide comprehensive solutions for systems connected to commercial AC mains, power plants or telecom central offices.
The plug-and-play product offers significant advantages as systems can be reconfigured and repositioned readily by simply replacing the power supply. The high-density, front-to-back airflow is designed for minimal space utilization and is highly expandable for future growth. The industry standard PMBus compliant I2C communications bus offers a full range of control and monitoring capabilities while the SMBAlert signal pin alerts customers automatically of any state change within the power supply.
The CCR Series is a compact half U height, fanless AC-DC rectifier that offers an alternative means for cooling in end applications such as liquid, conduction, convection or forced air. In a sleek form factor, the CCR reduces the real estate needed for use in hard to reach applications and offers a scalable solution with the ability to stack multiple units in an N+N redundant mode.
The GP Power Line is a family of high power rectifier modules for embedded applications or distributed power systems. The GP series utilized the most compact power trains in 6kW and up with 54Vdc output.
The Compact Power Line is a complete 1U high distributed power system of rectifier modules. The CP Series utilizes the latest, cost optimized technology to provide a regulated single output voltage of -54Vdc. The Highest Efficiency and Most Dense 48V Rectifier to be certified Titanium available to the General Market today. Both Universal AC and wide ranging DC input voltage units are available.
Power Shelves are racking systems designed to minimize installation and maintenance time with easy access hot-swap insertion to allow power module exchange under live power operation.
The EP Series of rectifiers are compact hot pluggable, fan-cooled single phase rectifiers and battery chargers for standalone use. The rectifiers can also be working in parallel as part of a DC power system equipped with an advanced digital controller.
Previous Generation AC-DC Power Supplies
Previous generations of AC-DC power modules are available for an array of applications in the telecom, datacom, industrial, medical and military markets.
Conduction Cooled and Liquid Cooled Power
The Conduction Cooled family of power supplies bring a new dimension to industrial power offering wide programmable output voltage capabilities and cooling flexibility. Featuring highly-dense, fully enclosed, fan-less conduction-cooled packaging, they are designed for minimal space utilization yet are highly expandable for future growth. These completely silent power supplies can be used in a broad range of applications.
Feature-set flexibility makes these power supplies an excellent choice for applications requiring alternative cooling options. Their robust design is intended for rugged applications where temperature extremes may be experienced. Electrical user interfaces are designed for simplicity and quick installation and hot-plug options are even available!
Hornet Voltage Regulator
Hornet family of non-isolated board mounted switching regulators are easy to use, fully integrated power modules for demanding industrial conditions. With highly accurate output voltage setting, high efficiency, exceptional power density, extended temperature range for extreme environments and proven high reliability, Hornet switching voltage regulators are well suited for industrial applications.
Hornet series includes step-down/buck regulators that deliver 11 to 108W maximum power and step-up/boost regulators that deliver 65W maximum power.
The RESILIENT 3000 power supply has extremely robust capability yet is easy to use, economical and has low up-front cost. Featuring high-density, ruggedized enclosure, it features an oversize high reliability fan, conformal coating and it is designed to operate over a wide temperature range. It can function either as a stand-alone power supply or it can be connected in parallel with other power supplies and managed by RS485.
Feature-set flexibility makes this power supply an excellent choice for applications requiring operation over a wide output-voltage range or for charging batteries. Its solid design is intended for rugged applications where poor AC grid conditions and temperature extremes may be experienced. The electrical user interfaces are designed for extreme simplicity for quick installation and turn-up.
ABB help their data center, computing, communications and digital content-provider customers wrestle with the exponential and insatiable demand for ever-increasing data, communications and processing capacity.
ABB customers challenge them to efficiently and reliably power increasing capacity, and to quickly scale better and smarter data infrastructures with power solutions that keep their energy costs in check and ensure that data and applications flow 24×7.
What ABB do
• Products for AC-DC OEM embedded power for datacom, telecom, medical and industrial applications.
• Products for DC-DC OEM conversion for boardmounted power applications in communications, computing, storage, industrial, medical and military markets.
• Full custom capabilities in both AC-DC and DC-DC product lines.
• Products for emergency standby, back-up power supply management and spike or surge protection, plus installation and maintenance services for markets including data centers, hospitals, telecommunications, financial institutions, transportation and industrial applications.
Uninterruptible Power Supplies (UPS)
• Products and services to provide a continuous supply of power and conditioning for missioncritical applications, plus global installation and maintenance services in markets including data centers, hospitals, financial institutions, telecommunications networks, wind energy, transportation and industrial.
DC energy systems
• Solutions for telecommunications, wireless and cable broadband service providers that leverage our extensive experience in turnkey project management, engineering, installation and maintenance services.