N2Power is a leading design and manufacturer of very high efficiency, ultra-small, power dense power supplies. Offering a variety of power solutions for a variety of products in the ITE, Broadcast, Industrial, Kiosk, Medical, Gaming, Lighting, and Test Equipment Markets, as well as many others. With a number of advantages to N2Power as follows:

  • Patented technology delivers more power in less space
  • “Green” by design – up to 93% efficiency
  • High Efficiency means a smaller energy loss in the form of low heat dissipation, and hence higher MTBF, less fan cooling needed and lower cooling costs
  • High Power Density means our PSU’s are extremely small in volumetric size through state of the art packaging techniques, yielding power densities over 15 watts/cubic inch
  • On supply active current sharing and Or’ing Diode for redundancy

The inherent advantages of N2Power’s PSU’s provide OEM designers with high quality supplies that allow for valuable extra “real estate” for increased functionality in the OEM product, while reducing thermal loads, cooling requirements, and lowering operating costs. Heat Kills!  Frequently, these reductions make convection cooling sufficient, eliminating the cost and noise of fans.

Highlights

  • Universal AC input / Full range
  • Installed on DIN rail TS-35 / 7.5 or 15
  • Brown-out protection
  • Protection: SCP, OCP & OVP
  • High operation temperature up to 70°C
  • True DC OK signal output
  • Withstand 2G vibration test
  • UL 508 (Industrial control equipment) listed
  • UL 1310 Class 2 Power unit / LPS pass
  • 3 years warranty

Highlights

  • Universal AC input / Full range
  • Installed on DIN rail TS-35 / 7.5 or 15
  • Built-in active PFC function, PF > 0.95
  • 150% peak load capability
  • Protection: SCP, OCP & OVP
  • Two selectable peak load modes
  • Built-in DC OK Relay contact
  • Built-in Remote ON/ OFF function
  • 3 years warranty

Highlights

  • Low standby power consumption ≤ 0.11 Watts
  • Wide input voltage range 85 to 264VAC, 47 to 63HZ
  • Also supports DC-DC (input 120 to 370VDC)
  • Convection cooled
  • Built-in EMI filter
  • Output voltage adjustable
  • Open frame dimensions 2.00” x 3.00” x 1.
  • 3000VAC input to output reinforced insulation
  • Protection type Class I or Class II
  • Low leakage current:
    ≤ 75μA at 264VAC (33μA at 115VAC)
  • Operating temperature -40°C to +85°C
  • Operating altitude 5000M
  • 3 year warranty

Highlights

  • Low standby power consumption ≤ 0.3 Watt
  • Wide input voltage range 85 to 264VAC, 47 to 63HZ
  • Also supports DC-DC (input 120 to 370VDC)
  • Convection cooled
  • Active power factor correction
  • Built-in EMI filter
  • Output voltage adjustable
  • Open frame dimensions 2.00” x 3.00” x 1.16
  • 3000VAC input to output reinforced insulation
  • Protection type Class I or Class II
  • Low leakage current ≤ 300uA
  • Operating altitude 5000M
  • 3 year warranty

Highlights

  • 275W AC-DC
  • 3” x 5” footprint
  • Up to 91% efficiency
  • High power density: Over 12W/cu in.
  • All outputs may be paralleled
  • Remote on/off
  • 5W 5V standby supply
  • Universal AC input
  • Active PFC (90 – 264 VAC)
  • Built-in OR-ing MOSFET for N, N+1
  • Active inrush current protection
  • RoHS compliant
  • PMBusTM interface for digital power management (optional)

Highlights

  • 275W DC-DC
  • 3” X 5” Small Footprint
  • Up to 91% Efficiency
  • High Power Density: 12 W / cu in.
  • All Outputs may be Paralleled
  • Remote On / Off
  • 5W 5V Standby Supply
  • 36 – 76 VDC Input
  • Active Current Sharing
  • Built in OR-ing MOSFET for N, N+1
  • PMBusTM Interface for Digital Power Management (optional)
  • RoHS Compliant
  • Input to Output Isolation

Highlights

  • 280W AC-DC
  • 3” x 5.3” footprint
  • Up to 90% efficiency
  • High power density: over 13W / cu in.
  • All outputs may be paralleled
  • Remote on/off
  • 5V standby output (1A)
  • 12V aux output (1A)
  • Universal AC input
  • Active PFC (90 – 264VAC)
  • Active current sharing for N, N+1
  • Active inrush current protection
  • RoHS compliant
  • POE compliant (54V and 56V models)

Highlights

  • 375W AC-DC
  • 3.3” x 5” footprint
  • Up to 93% efficiency
  • High power density: Over 15W/cu in.
  • All outputs may be paralleled
  • Remote on/off
  • 5V Standby output (1amp)
  • 12V Aux output (1amp)
  • Universal AC input
  • Active PFC (90 – 264 VAC)
  • Active current sharing for N, N+1 (main output)
  • Active inrush current protection
  • Convection cooling
  • RoHS compliant
  • OR-ing MOSFET board (optional)

Highlights

  • Open frame switching power supply
  • Wide input voltage range 90 to 264VAC, 47 to 63HZ
  • Also supports DC-DC (input 127 to 370VDC)
  • Maximum output: 500W with 30CFM fan or 240W with unobstructed convection cool
  • Ultra compact size: 5.03” x 3.00” x 1.38”
  • High efficiency: up to 93%
  • Remote ON/OFF function
  • 12V / 0.3A auxiliary output
  • 5V / 1.0A standby output with fan or 0.4A with convection cooling
  • Power Factor (at 230VAC, full load) > 0.94
  • Low leakage current ≤ 100μA
  • 3-year warranty

Highlights

  • 125W AC-DC
  • Up to 91% Efficiency
  • High Power Density: 6.7 W / cu in.
  • Universal AC input
  • Active PFC (90-264 VAC)
  • Built in OR-ing Diode/MOSFET for N+1 (Optional)
  • Single Wire Current Sharing (Most Models)
  • 3” X 5” Small Footprint
  • <1U High: 1.25″
  • 5Vsb @ 1amp & Remote Enable (ATX Models only)
  • No Load Operation
  • RoHS Compliant

Highlights

  • 160W AC-DC
  • Up to 90% Efficiency
  • High Power Density: 8.5 W / cu in.
  • Universal AC input
  • Active PFC (90-264 VAC)
  • Built in OR-ing Diode/MOSFET for N+1 (Optional)
  • Single Wire Current Sharing (Most Models)
  • 3” X 5” Small Footprint
  • <1U High: 1.25″
  • 5Vsb @ 1amp & Remote Enable (ATX Models only)
  • No Load Operation
  • RoHS Compliant

Highlights

  • Low standby power consumption – under 0.3 Watt
  • Wide input voltage range 85 to 264VAC, 47 to 63HZ
  • Active power factor correction
  • Built-in EMI filter
  • Output voltage adjustable
  • Open frame dimensions 2″ x 3″ x 1.16″
  • 4000VAC input to output 2XMOPP insulation
  • Protection type Class I and Class II
  • Low leakage current – under 75uA
  • Operating altitude 5000M
  • 3 year warranty
  • ANSI/AAMI ES60601-1, EN60601-1 & IEC60601-1 3rd Edition Safety Approvals
  • CE Marked
  • Compliant to RoHS II & REACH

Highlights

  • Up to 87% efficiency
  • High power density
  • Remote on/off
  • 5V Standby output (1amp)
  • Universal AC input
  • Active PFC (90 – 264 VAC)
  • Inrush current protection
  • RoHS compliant